A Compact NTC Sensor Designed for Direct Clamp Mounting

Conventional surface temperature probes may require brackets, screws, adhesive or additional holders before they can be fixed to a pipe or heating surface.

Our clamp-mount NTC sensor integrates the sensing element and mounting structure into one finished assembly.

Technical Data

Typical NTC Thermistor Options

A wide range of NTC resistance and B-value combinations are available for different controller and temperature sensing requirements.

Accuracy Options

Resistance Tolerance: 0.5%-5% available on request.

Temperature Accuracy: Approximately ±0.1°C to ±2°C, depending on thermistor specification, calibration and operating conditions.

Custom R-T Curve Available

If your controller already uses a defined temperature-resistance curve, please provide: R25 + B Value + Tolerance + R-T Table. We can evaluate an NTC element matched to your control system.

How to Select Right Pipe-Mounted NTC Sensor

3 Common Mistakes When Selecting a Clamp-Mount NTC Sensor

Common Mistake	Why It Causes Problems	Better Approach
If the NTC value is correct, installation does not matter.	Poor surface contact can cause slower or less representative temperature feedback.	Confirm both NTC parameters and mounting contact.
Any clamp size can work on the pipe.	Incorrect clamp size may cause loose mounting or excessive mechanical stress.	Provide the pipe diameter or mounting dimensions.
Any 10K NTC is compatible.	Different B values result in different R-T curves even when R25 is the same.	Confirm R25 + B Value + Tolerance.

For a Clamp-Mount Sensor, Electrical Stability and Surface Contact Are Both Critical

A surface temperature sensor can have the correct NTC parameters but still perform poorly if the mounting structure does not maintain reliable contact with the measured surface.

The complete sensor therefore depends on: NTC Stability + Elastic Clamp Force + Surface Contact + Insulation + Mechanical Structure + Cable Connection

Incoming Material Inspection

· NTC thermistors checked according to required resistance and B value

· Heat-resistant plastic components checked according to product specification

· Elastic metal clamp components inspected for structure and consistency

· Wire and insulation materials checked before production

· Connectors verified according to customer requirements

Process Control

· NTC-to-wire connection controlled for electrical reliability

· Sensor element positioned correctly inside the mounting structure

· Plastic holder and elastic clamp assembled according to design

· Clamp and contact-piece geometry checked for consistent mounting

· Wire length and connector configuration verified before final assembly

Finished Product Inspection

If You Are an Equipment Manufacturer / OEM

If You Are a Distributor / Importer

Sample Support

Sample Validation Before Mass Production

For a clamp-mount temperature sensor, sample validation should confirm both electrical compatibility and mechanical / thermal compatibility.

Electrical Compatibility

· R25

· B value

· Tolerance

· R-T curve

· Response

Mechanical / Thermal Compatibility

· Clamp size

· Mounting position

· Surface contact

· Clamp force

· Pipe diameter

· Wire routing

· Connector

Surface Contact Is Especially Important

A surface-mounted NTC sensor does not measure temperature in exactly the same way as an immersion probe. Its performance depends strongly on the thermal contact between the sensor and the measured surface. Where required by the application, thermal conductive silicone can be used to help improve thermal transfer.

Quality Assurance

MOQ & Lead Time

Cooperation Process: Application Review → NTC Curve Confirmation → Pipe / Mounting Dimensions → Clamp Structure → Wire / Connector → Drawing Approval → Sample Testing → Pilot Order → Mass Production

About Us

Capability	Details
Main Products	NTC Temperature Sensors, RTD Sensors, Surface Temperature Sensors, Immersion Probes and Custom Sensor Assemblies
Sensor Elements	NTC thermistors and other temperature sensing solutions
Electrical Customization	R25, B value, tolerance and R-T curve
Mechanical Customization	Clamp structure, sensor dimensions and mounting design
Wire Customization	Wire size, length and color
Housing Options	Heat-resistant plastic and applicable protection structures
Connection	Different connector options available
OEM / ODM	Custom development based on drawings, samples and applications

About Us From NTC Element to Ready-to-Install Clamp Sensor

For a pipe-mounted temperature sensor, choosing the thermistor is only half of the job.

The complete sensor must match: R25 + B Value + R-T Curve + Pipe Size + Clamp Structure + Surface Contact + Wire + Connector

Our goal is to provide a finished sensor assembly that can be installed directly into your heating or thermal-control system.

Q1: What is a pipe-mounted / clamp-mount NTC temperature sensor?

It is an NTC temperature sensor integrated with a mechanical clamp structure. The sensor can be fixed directly onto a pipe or equipment surface for surface temperature measurement.

Q2: What is the temperature range?

According to the supplied specification: -40°C to +105°C.

Q3: What is the response time?

The specified response time is T0.63 ≤30 seconds in water at 0.4m/s. Actual response on a pipe or surface depends on surface contact, material, mounting position and thermal conditions.

Q4: Can the sensor be used for pipe temperature measurement?

Yes. Pipe heating is one of the listed typical applications. The clamp size should be matched to the actual pipe or mounting dimensions.

Q5: Is thermal conductive silicone required?

Not always. The supplied structure information indicates that thermal conductive silicone can be used where required. Whether it is necessary depends on surface contact and thermal-transfer requirements.

Q6: Can I choose a different NTC R-T curve?

Yes. Different NTC R-T curves are available according to controller requirements.

Q7: Can I customize the wire size and color?

Yes. Different wire sizes and colors are available according to project requirements.

Q8: Can you provide different connectors?

Yes. Please send the connector model, photo or equipment interface information.

Q9: Can the clamp or mounting structure be customized?

The product can be customized according to the temperature environment and application. Please provide the pipe diameter, mounting dimensions or existing sensor.

Q10: Can this sensor replace an immersion temperature probe?

Not automatically. A clamp-mounted sensor measures surface temperature, while an immersion probe measures temperature directly inside liquid or air. The correct structure depends on the actual measurement requirement.

Q11: Can you match my existing sensor?

Yes. Please provide Existing Sensor + R25 + B Value + R-T Curve + Pipe Size + Wire + Connector for evaluation.

Q12: What information do you need for a quotation?

For a faster quotation, please provide Application + R25 + B Value + Temperature Range + Pipe / Mounting Size + Wire Length + Connector + Quantity.